Personnel air shower-tunnel type

May 10, 2019 Air purification equipment 405 views

Product Introduction

The air shower is a device for purifying people and preventing polluted air from entering the clean area. It uses high-speed clean airflow to remove dust particles on the surface of clothing or materials on personnel. At the same time, it also functions as an air lock room to prevent outdoor air from polluting the clean room or low-level to high-level clean room.

The tunnel-type air shower is suitable for clean room workshops with a large area and a large number of users. The air shower room is equipped with stainless steel columns, which can control the personnel to walk along the S-shaped route. The dust removal process is more comprehensive and thorough.

Product Features:

The air in the air shower room is pressed into the static pressure box by the fan through the primary filter, purified by the high-efficiency filter, and ejected from the nozzle at high speed, thereby blowing away the dust attached to the person and the surface of the carried objects, and preventing unpurified air Enter the purification area.

Product Features:

*The product structure is sturdy and easy to install
* The PLC control system is stable and efficient. If there is a power failure, the air shower door will automatically unlock
* Initial high-efficiency two-stage filtration, high-efficiency efficiency up to 99.99% efficiency@0.3um

* High wind speed 360 degree adjustable stainless steel nozzle

* Easy to replace the initial and efficient devices
* Equipped with special purification lamp for clean room
* Adjustable blowing time (10-99 seconds)
* With German brand door closer.

* Reliable interlock function
* Equipped with emergency stop button

Standard drawing

Technical Parameters

Specification model		EA-8D-1300		EA-10D-1300			EA-12D-1300				EA-16D-1300
size	W(mm)	1300(800)		1300(800)			1300(800)				1300(800)
	D(mm)	4000(3920)		5000(4920)			6000(5920)				8000(7920)
	H(mm)	2150(2000)		2150(2000)			2150(2000)				2150(2000)
Number of users		8		10			12				16
Material		Cold-rolled steel plate baking varnish or SUS304
Gate		Cold-rolled steel plate baking varnish or SUS304 tempered glass window with door closer
illumination		12W×3		12W×4			12W×4			12W×5
Number of nozzles		Stainless steel/direction adjustable type (embedded type)
		48 pcs		64 only		72 only			90 only
Number of HEPA		570×570×70mm filtration efficiency 99.99% (0.3um)
		6	8		8			10
PRE FIL TER		570*570, G3
		6	8		8			10
Wind speed		22～30m/sec
Fan		High static pressure and large air volume motor
Quantity		6		8			8			10
control		PLC automatic control, touch panel, LED display blowing time, with fault prompt. Electronic interlocking function
power		4560W		6080W			6080W			6080W
power supply		3Φ380V
		Note: If you need to add stainless steel railings inside, increase the internal width to at least 1200mm.